The blast drying oven provides drying, baking, and wax melting functions for industrial and mining enterprises, laboratories, research institutions, etc. The microcomputer intelligent binocular temperature control system has temperature control protection, accurate and reliable. The working temperature can be set arbitrarily and has a deviation alarm function. The air inlet switch can circulate hot air freely. Due to the long-term high temperature and constant temperature of the equipment, proper maintenance and upkeep of the blast drying oven are more necessary. Let's talk about how to maintain and pay attention to the drying oven during use.
Do not put flammable items in a dry box without explosion-proof devices.
Before use, it is necessary to pay attention to whether the power supply voltage used matches. When using, the grounding wire of the power socket must be grounded according to regulations.
After each use of the air drying oven, all power must be cut off and the inside and outside of the oven should be kept clean frequently. Hang corresponding signs after cleaning.
Do not overcrowd the items inside the box, and leave a space for natural air convection to allow moist air to accelerate and escape on the top of the wind.
The silver contacts of the temperature regulator should be regularly checked for burrs or unevenness. If there are any, the contacts can be sanded flat with a fine gauze cloth before use, and should be regularly wiped clean with a clean cloth to ensure good contact (note that the power supply must be cut off). Do not hit the metal pipes of the indoor temperature regulator to avoid affecting sensitivity.
When using the air drying oven with electricity, do not touch the electrical parts on the left side of the oven with your hands or wipe them with a damp cloth or rinse them with water. During maintenance, cut off the power supply
The power cord should not be wra
pped around metal objects, and should not be set in high temperature or damp places to prevent rubber aging and electric leakage.