In general, a rod mill is a type of grinding equipment that operates 24 hours a day. After being powered on, the material machine continuously feeds the material. Under the action of the deceleration device, the motor drives the cylinder to rotate. The steel bars and materials inside the cylinder will move together under the action of centrifugal force and friction, and when they reach the highest point, they will be thrown down under their own gravity.
Self maintenance is an effective way to extend the lifespan of a machine, so in order to create long-term economic value, the rod mill should pay attention to maintenance and upkeep during use. We suggest that after the mill has been running continuously for a month, all the lubricating oil in it should be discharged, the machine cleaned, and then new oil poured in, and this habit should be maintained regularly. In addition, check the lubrication and oil level of each part according to the operating specifications. During the long-term operation of the mill, it is normal for the transmission bearings to heat up, but it is necessary to ensure that the temperature does not exceed 55 ℃ to avoid burning out parts and causing a strike.
The three roll four cylinder rod mill has a unique device for taking, pouring, cleaning, and dust removal, which reduces the labor intensity of operators and the harm of silica dust. The process of changing rod striking to rod grinding adopts low noise exhaust fans and rubber rollers, reducing working noise and improving working conditions.
Four roller sixteen cylinder rod grinding machine with brush pressure air mechanical cleaning, cleaning to avoid mutual contamination of samples. The dust generated during cleaning is concentrated and discharged in a small hood before diffusion, reducing the harm of dust to human health. The rod grinding cylinder adopts a cross arm micro elastic locking structure, which is firmly locked, easy to operate, no sample leakage, high efficiency, low noise, and has a good crushing effect on gold in the sample. The test results are stable, and the operation requirements are not strict.
The shell of the four roll and fifty cylinder rod mill is made of cold-rolled steel plate, which packages the entire machine and plays a sealing and aesthetic role. The bottom of the base is equipped with shock-absorbing rubber piers, forming a shock-absorbing effect, which can make the machine run smoothly and reduce vibration and noise. It can effectively curb the instability and vibration of the machine during operation.